Building - Electrical (Stand Alone work)

Hardwiring a ChargePoint Home Flex EVSE mounted inside the garage, set to 48 amps. Pulling #6 MC cable from the existing 200-amp panel to the garage. Changing to 3/4-inch EMT inside the garage and pulling #6 THHN/THWN-2 through the conduit to the EVSE. We will install a 60-amp breaker in the panel to protect the EVSE. Also, installing a load-shedding device to protect the EV charger from overloading the 200 A service. The charger has built-in GFCI protection