LP Tank Install (AG or Inground)

SET 1-120G AG LP VERTICAL TANK ON BLOCK LEFT SIDE OF THE GARAGE STOWARDS THE REAR CORNER. RUN 1INCH BM ALONG THE REAR OF GARAGE. DRILL A HOLE, RUN IN AND UP THE GARAGE INERIOR TO THE CHIMNEY. DRILL A HOLE AND RUN THE BM INTO THE BASMSENT WITH A TEE AT THE FIREPLACE. FROM THE TEE RUN 3/8 COATED COPPER TO THE ASHDROP. DRILL A HOLE ABOVE AND CONTIUE THE 3/8 UP AND INTO THE FIREPLACE WITH A SHUT OFF. CONTIUE THE 1 INCH TO THE DROP CEILOING, TRANSITION TO 3/4 CSST AND RUN ABOVE TO THE BASEMENT BATHROOM WITH A TEE FOR THE COOK STOVE WITH 1/2 SST AND FLOOR FLANGE AND SHUT OFF IN THE KITCHEN. DRILL A HOLE OUT FROM THE BASMENT BATHROOM, TRANSTION TO 1/2 BM ANF RUN OUT ALONG THE DECK JOIST TO THE BBQ GRILL WITH A SHUT OFF. SET LINES FOR PRESSURE TEST. INSTALL A PETERSON G10-24/30-15P STANDING PILOT VENT FREE BURNER WITH LOGS. INSTALL FIREPLACE HOOD. MAKE FINAL CONNECTIONS. TIE IN THE LOG SET WITH A SHUT OFF AND FLEX.INSTALL SMOKE/ CO DETECTOR IN THE LIVING SPACE OF THE LOG SET. TIE IN THE COOK STOVE WITH A SHUT OFF AND FLEX. TIE IN THE BBQ WITH A SHUT OFF AND 6' GRILL HOSE. LEAK CHECK SYSTEM. TEST FIRE AS NEEDED AND INSTRUCT THE HOMEOWNER UPON APPROVAL. Your application for a Building Permit has been reviewed for compliance with the 2022 State of Connecticut Building Code. The permit for the proposed work is approved. All work is subjected to field inspections. Comments below are to be reviewed and followed. 1. Line in the garage shall be Black metal or protected from damage . NFPA 58