RENOVATIONS/ALTERATIONS

Installation of wood fireplace insert. Insert to comply with New York Building Code Sections: 2111.14 Exterior Air - Factory-built or masonry fireplaces covered in this section shall be equipped with an exterior air supply to ensure proper fuel combustion unless the room is mechanically ventilated and controlled so that the indoor pressure is neutral or positive. 2111.14.1 Factory-Built Fireplaces - Exterior combustion air ducts for factory-built fireplaces shall be listed components of the fireplace and installed according to the fireplace manufacturer's instructions. 2111.14.3 Exterior Air Intake - The exterior air intake shall be capable of providing all combustion air from the exterior of the dwelling. The exterior air intake shall not be located within a garage, attic, basement or crawl space of the dwelling nor shall the air intake be located at an elevation higher than the firebox. The exterior air intake shall be covered with a corrosion-resistant screen of 1/4-inch (6.4 mm) mesh. 2111.14.6 Outlet - The exterior air outlet is permitted to be located in the back or sides of the firebox chamber or within 24 inches (610 mm) of the firebox opening on or near the floor. The outlet shall be closable and designed to prevent burning material from dropping into concealed combustible spaces.