Electrical

Included Work: -Remove existing 60-amp electrical panel. -Furnish and install new 100-amp electrical panel with appropriate breaker spaces. -Reuse existing conduit raceway. -Reuse existing conductors, provided they are code-compliant and suitable for the 100-amp application. -Provide new breakers for existing circuits as required. -Install whole-panel surge protection. -Transfer existing circuits into new panel. -Properly terminate and torque all applicable connections. -Label circuits in the new panel. -Test circuits and verify proper operation upon completion. -Clean work area and remove replaced panel and installation debris. Notes / Assumptions: -Existing conduit raceway and conductors are assumed to be suitable for reuse and properly sized for the new 100-amp panel. -Existing conductors will be inspected prior to reuse. If conductors are damaged, undersized, deteriorated, or otherwise unsuitable, replacement will be quoted separately. -Existing branch-circuit wiring is assumed to be in serviceable condition. -New breakers will be provided to match the existing circuits and new panel configuration. -AFCI/GFCI protection will be provided where required by applicable code for circuits being modified or replaced. -Existing circuit locations will be maintained where practical. -New panel will be properly labeled and circuits identified. -Surge protective device will be installed at the new panel in accordance with manufacturer requirements and applicable electrical code. -Work includes normal panel replacement access only.