Electrical — Addition and/or Alteration

Proposed Solution: JCI will supply, install, program, test, and commission a Hosted Kantech Access Control System. This project will include the upgrade and conversion of existing headend panels on a 1-for-1 basis, while retaining all previously installed field devices, where applicable. Due to operational constraints, the work will be executed in multiple phases, as detailed below. Access Control System (ACS) Software: Include Hosted Kantech platform with required licensing. Phase 1: Provide and install six (6) new headend panels: Four (4) panels for Financial/Admin Section & Two (2) panels for Funds Office Section. Lock power supplies are included in this proposal to cover the new electric locks Panels may be mounted near existing panel locations. Existing field devices will be reconnected to the new panels by the installation team. Phase 2 for Financial/Admin Section: Maintain existing (8) doors. Remove (1) door. Add (5) New doors. Phase 2 for Funds Sections: Maintain existing (3) doors. Remove (1) door. Add (4) New doors. Phase 3 shall be Gate Integration: Provide one (1) new Kantech headend panel. Field Devices: New Card readers, door contacts, REX Motion Sensors, door release button. Existing field devices will be reused wherever possible Cable: JCI recommends/will install, terminate, and test all new cabling from access points to the Access Control Panel. Existing wiring will be reused and spliced where possible. Installation shall comply with 2017 NEC.